Trilennium Eclipse Passive T-Turn Drive, 3020 Series Handleset

Trilennium Passive Handle set Trim with T-Turn Drive works with the Trilennium 3020 series Inactive Panel Multi-Point Lock

Used ONLY with the 3020 Passive Multipoint lock which is operated by the thumb turn. Lever handles do NOT move on this handle set.

Handle to Cylinder Spacing: 6 inch (152.4mm)

Door Thickness: 1-3/4 inch (45mm)

Escutcheon Plate Width: 2-7/16 inch (61.9mm)

Escutcheon Plate Length: 10 inch (254mm)

Cross bore: works with 1-11/16 or 2-1/8 inch

Note 1:

Standard cross bore on most W&F or Endura hardware is 1-11/16 inch. Some doors use a 2-1/8 inch bore. Most Multipoint lock handle sets are only 2 inches wide and will not cover the larger holes.

Pella Entry Door Cross Bore: 2-1/8 inch Standard

Peachtree lPD Cross Bore: 1-11/16 inch Standard

Handle set Trim for 2-1/8 inch Cross Bore: Pinnacle, Eclipse, Rectangular & Grip Hardware

Handle set Trim for 1-11/16 Cross Bore: The full W&F line including Horizon and Some Emtek with 2 inch wide plates.

Note 2:

Satin Nickel Finish is available as standard Plated or TriLast® which resists tarnishing and discoloration.